Eel Skin - Can I Clean A Mark

SAGARRA family tree AND TECHNICAL SPECIFICATIONS OF THE MOD. ALEVIN 2 - XANGUET -

Hi buddies,

Oddly enough we are faced with negative models of reels economically for Sagarra makes the mechanism easy to appearances is difficult to make, is a very expensive mechanical manufacturing, the quality of materials is the same as that may be of a professional reel, and reel goal of these is to attract new fishermen, is focused directly to the kids fishing enthusiasts, a goal that the factory will cost the money.

This goal came from the factory and the Alevin Aims AIMS, the factory continued to promote the purchase of a brand Sagarra AIMS in 1960, making the Alevin 2.

reels models are given much play in the street and commercially sold very well, because the quality and attractiveness of the article was perfect, it is easy to recognize, are models that have not had a very long transition have not undergone changes in design and have a life very short in the history of the Factoria Sagarra.

Today

are important models for the collector because of its scarcity, and that the task they could say was to be a toy, were created for children, so there are very few who survived hands of a future very young fish.

ALEVIN 2 (1962-1967)

reel This model was born in 1962 and replaced the Xanguet in the year 1967-68, the 2 Replaces fry or fingerlings Aims Alevin 1 Aims of the house, the design of 1 to 2 is quite different, 1 is oval and round 2 is apart from the mechanism.

TECHNICAL MOD. 2 ALEVIN

YEAR: 1962-67

BODY: Body Xanguet and Sportin identical but not anodized if no fire painted light gray, even in the photos appears white, the leg comes close to the center of the body and arch, the size of this model is small (10 cm long by 9 cm high), one of the curiosities of this model is the anti, is in the body not at the top as in other models, then turns to find this system in the body anti the oval bodies, another curious and this if only in these models is the system of holding the lid to the body, these models the body has a central hole, is where the shaft goes in the lid in the center and function makes top and crown, is fitted with a round head Turkish.

injection molding system of duralumin metal.

POINT: ALEVIN in the top 2 in large print and small MADE IN SPAIN, lying around in the center of the lid.

TOP: painted light gray, thick and which act as cover and crown, in contrast to all models in these three models Factoria small cap turns at the same rate as lever.

CUP: painted light gray, pick up the system cart handle, the handle is made of hard steel chrome plated, the bowl is 5 cm in diameter and fully closed without no holes or lead counterweight, Asa recovery system is quite simple, the same arc makes a distorted form with a little push is left open or closed.

HANDLE AND KNOB: bullet in light gray and black plastic knob on trumpet with clear cap.

COIL: plastic in two colors red and green, although it is clear that the black or Sporting Xanguet also okay, but his is the color, the coil is in only site that carries the names of the Factory Sagarra, registration SAGARRA Printed large and small, PATENTED, making arc around the coil, are deep to accommodate a capacity of 100 m nylon 0.30.

PLUG: black plastic hat shaped with three wings and a small 2.5 cm in diameter.

MECHANICAL SYSTEM: works with the typical game in the bowl pinion set screw and crown cover are tapered but not helical teeth or going from high to low but are not rotated are completely straight, and the system of rotation of the bowl is a small pin that is stuck in a hole in the shaft and the other half of the pin into a recess offset round in the lid inside, so when we turn the knob we run the pin inside the recess offset by the coil up and down while we turn the bowl, has a recovery of 54 cm and a total weight of 190 gr reel.

In this picture we can see the handle of the coil basket and deep red.

We can see the inside of the spool with the pin in the center that you commented that to raise and lower the coil and pinion conical.

The body as seen in the photo is the hole in the center to take the top and anti.

And most curious of these toy models, the cover at the same time makes spiral conical crown but not as you see in the picture, the offset recess which runs round pin which is located on the shaft making the winding up and down the left-hand threaded shaft that is in the center that is passing through the center of the body to secure the lid.

The three models are on the reels identical mechanical sense, seen one seen all three, the only difference is that at the top puts the name of the model and one is painted, in this case Alevin 2 and the other two are anodized the mod. Xanguet and Sporting.

TECHNICAL MOD. XANGUET

The Xanguet happened to Alevin 2 and was the inspiration that led some traders to make the Sporting Portuguese.

YEAR: 1967-80

BODY: Body identical to 2 and Sportin Alevin is anodized not painted in light gray as the Alevin 2, the leg comes close to the center of the body and arch, the size of this model is small (10 cm long by 9 cm ), one of the curiosities of this model is the anti, is in the body at the top as in other models, then turns to find this anti-system in the body in the oval bodies, another curious and this if only in these models is the system of holding the lid to the body, but the most significant and famous of this model is that Marlin has recorded and love to many collectors in all three models the body has a central hole, is which passes the shaft having the cap in the center and which feature top and crown, is fitted with a round head Turkish.

POINT: XANGUET at the top in large print and small MADE IN SPAIN, lying around in the center of the lid.

TOP: Anodized, thick as they make the role of cap and crown, in contrast to all models in these three models Factoria small cap turns at the same rate as the lever.

CUP: anodized, the system will pick up the basket handle, the handle is made of hard steel chrome silver, the cup is 5 cm in diameter and completely closed with no holes or lead counterweight, Asa recovery system is quite simple, the same arc makes a distorted form with a little push is left open or closed.

HANDLE AND KNOB: anodized and black plastic knob on trumpet with clear cap.

COIL: black plastic, although it is clear that the red and green Alevin 2 also had better, but yours is black, in the coil is the only site inscribed with the name of the Factory Sagar, registration SAGARRA in large print and petty patents, making arc around the coil, are deep to accommodate a capacity of 100 m nylon 0.30.

PLUG: black plastic hat shaped with three wings and a small 2.5 cm in diameter.

MECHANICAL SYSTEM: works with the typical game in the bowl pinion set screw and crown cover are tapered but not helical teeth or going from high to low but are not rotated are completely straight, and the system of rotation of the bowl is a small pin that is stuck in a hole in the shaft and the other half of the pin into a recess offset round in the lid inside, so when we turn to handle the pin we run from inside the recess offset by the winding up and down while we turn the bowl, has a recovery of 54 cm and a total weight of 190 gr reel.

We can see the anodized body with round head nut in the center to fit the lid.

In this picture we see the amorous charm of this model the Fish Marlin.

TECHNICAL MOD. SPORTING

mind as I said earlier model that grew out of order to the factory Sagarra for some Portuguese businessmen, as did about 3 to 4000 units, many by name Sporting explanation if the football team etc, but as mine is that they put Sporting translated from Portuguese into English is sports, and certainly wanted to give the reel the idea of \u200b\u200bsport fishing, and thanks to the coil identical to that of the silkscreen Xanguet Sagar and patents now we label it as a reel Sagarra.

YEAR: 1970

BODY: Body identical Xanguet Alevin 2 and is anodized not painted in light gray as the Alevin 2 , the leg comes close to the center of the body and arch, the size of this model is small (10 cm long by 9 cm high), one of the curiosities of this model is the anti, is in the body at the top as in other models, then turns to find this anti system in the body in the oval bodies, another curious and this if only in these models is the system of taking the top the body, in the three models, the body has a central hole, is where the shaft goes in the lid in the center and function makes top and crown, is fitted with a round head Turkish.

POINT: SPORTING at the top in large print and small MADE IN SPAIN, lying around in the center of the lid.

TOP: Anodized, thick as they make the role of cap and crown, in contrast to all models in these three models Factory small cap turns at the same rate as the lever.

CUP: anodized, the system pick up the basket handle, the handle is made of hard steel chrome plated, the bowl is 5 cm in diameter and completely closed without any holes or lead counterweight, recovery system Asa is rather simple, the same arc makes a distorted form with a little push is left open or closed.

HANDLE AND KNOB: anodized and black plastic knob on trumpet with clear cap.

COIL: black plastic, although it is clear that the red and green Alevin 2 also it will, but yours is black, in the coil is the only site that carries the names of the Factory Sagarra, registration SAGARRA in large print and petty patents, making arc around the coil, are fitted deep with a capacity of 100 m nylon 0.30.

PLUG: black plastic hat shaped with three wings and a small 2.5 cm in diameter.

MECHANICAL SYSTEM: works with the typical game in the bowl pinion set screw and crown cover are tapered but not helical teeth or going from high to low but not drawn are completely straight, and the system of rotation of the bowl is a small pin that is stuck in a hole in the shaft and the other half of the pin in a recess round off center in the lid inside, so when we turn to handle the pin we run inside the recess offset by the coil up and down while we turn the bowl, has a recovery of 54 cm and a total weight of 190 gr reel.

Looked behind

can see that the Marlin does not exist in this model, and all demos anti identical to Xanguet and Alevin 2.

In this picture we see the two covers, though it became a different mold Sporting the name similarity is identical. Well

colleagues hope that you like and if you have any information about something do not hesitate to comentármela.

A greeting to all lau

Where To Get A Pet Platypus

SPORTING CHAMPIONS THE GIFT FOR FISHING CHAMPIONSHIPS AND FLAGSHIP OF THE MODEL FACTORY SAGARRA

Hi buddies,

In This small publication my goal is to show something i mportant while for us collectors is a good collector's item as it is difficult to find.

Sagarra The factory in 1975 to 1982, he served as partner in the organization of Spain's fishing tournaments and other regional, in which participation of the factory was to give a gift of luxury and to publicize the Sagar brand.

feasted Riufort Mod Mod for river and Tarzan for Tues

As you can see from the photos, and forgive the quality of them as they are very old and pass them on to digital I have not been able to improve the quality, you can view a luxury, re given away to the top three spots in the championship.

roll model for my flagship model home Sagarra Tarzan, the production of luxury boxes in the factory responsible to the Lord. Viñas only for these acts, all wood with velvet and flannel-like fabric.

Specifically, the photos are the X National Casting Championship in Granoller not is very clear but I believe they date to 1979.

The only difference in the spool of his original presentation to the sale, are the coils, made of three different colors, gold, silver and bronze, so as in all competitions marked by 1 post with gold, 2 º positions with the silver and 3 rd place with the bronze.

In the first pictures from left to right is the first reel to reel in gold, the middle one third in silver and bronze is right.

more coil to the metal plate has a recording championship, if it was 1 º 2 º 3 º position, year and in the locality to the plate can be seen in the photos.

knew that Sagarra reels were delivered in the championships, but had doubts that model, at first I thought it would be the 2,000 race as the name says competition, but the Lord Manel last owner and son of founder Sagarra house Mr. Isidro, told me that I stop in 1982 and this is the year 2000 competition model was born, so it was not fit this model is that it gave and the Lord Manel not remember if maybe the last year 2,000 but present model not believe it, just remember that the model Tarzan gift, a doubt that someday we'll know.

As you can see in the pictures is a wonder, who will catch, so if it is clear that you have to try, so I give the places where these reels were given to have it in mind and if you can find them, but if you find more than one thought in my hahaha.

Sagarra The factory took part in these championships in Spain about 6 or 7 years, about three years in Granollers Barcelona, \u200b\u200ba year in Madrid, Zaragoza a year and three years in the area of \u200b\u200bAlcira, and Cullera Oliva in Valencia, in other regional championships as Mare Nostrum Mediterranean in Valencia and The Golden Cane Castellon.

Well mate, I hope you enjoy these little times we spent together and especially that we can rescue these reels jewelry we've seen in this report.

A greeting to all lau.

Example Of Holographic Will Province Of Ontario

PRESS

Lords Members, Exhibitors, Supporters, Friends and general public, comes the completion of a new year and with it the culmination of our period as the Board of Directors by ROTTWEILER CLUB OF PERU.

During our exercise as they have done many exhibitions with great success, A total of five, most of them judged by international judges and experts from Rottweiler breeders what fills us with great satisfaction and pride and we always had institutional activity, the same as we would have liked more varied but unfortunately the situation we live we could not carry out the work seminar and training that were scheduled as these did not reach the number of people suitable for implementation and at this point is that we would like for the next few years as more partners are displayed with the institution and that after all the profit is for our dogs.

We would like to inform you that in the Financial Plan OR ECONOMIC all was happiness and prosperity and that it was great because it would close with a bang our management, but unfortunately this is not the case since the last circuit of exhibitions: ROYAL TOUR Cannin resulted in losses and were unable to satisfy CANCEL HAD OUTSTANDING OBLIGATIONS, ESPECIALLY WITH THE KENNEL CLUB PERU ENTITY due by the amount of S /. 480.00 (EIGHTY FOUR NEW SOLES) CONCEPT FOR ANNUAL FEE DEBIT CLUB, a situation that was contemplated that would exceed the revenue they were going to get entries in the circuit of exhibitions held in the month of November, THIS IS TO REQUEST THE REGISTRATION AND EARLY COMMITMENT OF COPIES TO SEE THAT NUMBER OF REGISTERED be counted and do our calculations, everything was done within the expectations that had been formed, there were inscriptions, many of them outside the time limit initially agreed but were made to order for anyone to stay Apart from this great party, but unfortunately for many of the CLUB is registered and assured their participation and others who did participate AS NEVER PAID THEIR REGISTRATION situation was made public in any exhibition CIRCUIT AND STRESS OF THOSE PEOPLE WHOSE EXEMPLARY APPEAR IN THE CATALOG LISTED AS THEIR PROPIETRIOS REGISTRATION FORMS SENT THEIR EXEMPLARY, AND OF THOSE WHO TOOK THEIR COPIES IN THE EXPOS AND NOT PAID YOUR PAYMENT OF ENTRIES, BECAUSE THEY WOULD BE AT THE CLUB AND DEBTORS ARE GOING TO ASK FOR PAYMENT OF YOUR ENTRY FEE IN ANY EVENT WILL NOT BE RETURNING TO REGISTER OR PARTICIPATION IN ANY ORDER OF COPIES OF YOUR PROPERTY WHILE YOU HAVE TO HONOR THE OUTSTANDING DEBT TO OUR CLUB., the ratio of persons slogan DEBIT THE CLUB is the end of this release.

Most serious of all is that THE KENNEL CLUB PERU DEBT TO KEEP THEM STILL HAVE DECIDED NOT RECOGNIZED THE RESULTS OBTAINED IN THE CIRCUIT Cannin ROYAL EXHIBITION 2010, THAT IS NOT VALIDATING THE RESULTS OF THE EXEMPLARY WINNERS OF DIFFERENT CATEGORIES OF SUPPORT DEBT EVEN WITH THEM, understand this as damaging to people who have been complied with pay on time and in due form inscriptions, unfortunately adversely affected by the negative actions of people who have no qualms about not honoring his debts.

CLUB In any case, thinking that this can be treated or may be due to an unforeseen or improperly calculating his chances at that time, November 2010, it GIVES A NEW TERM IN ORDER TO COMPLY WITH PAY AND THAT UNPAID ENTRIES ARE CREATING A TREMENDOUS DAMAGE TO THE INSTITUTION AND WE PLEASE REQUEST TO THE FORTNIGHT OF JANUARY TO MEET THE YEAR 2011 TO PAY DEBT in order VALIDATING THE RESULTS ACHIEVED IN THE EXHIBITION THE MONTH OF NOVEMBER 2010.

For this reason it can not carry out the fellowship dinner and awards the best examples of 2010 and will understand that having the numbers in red can not be done other than spending first meet our obligations and above all, not having approved the show circuit winners because that would be rewarding.

On the issue of TRANSITION OF OUTGOING BOARD WITH THE NEW BOARD NEXT, it was thought the dinner will take to meet this formalism, but as unfortunately this does not take place because he remembers being PRESIDENT fulfilling deliver ELECT THE BOOK OF RECORDS TO BE LEGALIZED BY THE NEW BOARD, AS WELL AS REPORTED THAT THE RUC'S CLUB TO BE MANAGED BY THE NEW BOARD.

We can only thank you all for supporting us with their presence and invaluable help during our management and involve them in the coming years are full of commitment to the new management and ESPECIALLY TO OUR RACE!

HAPPY HOLIDAYS AND A HAPPY NEW YEAR ¡!!!!! RELATIONSHIP

ROTTWEIELR DEBTOR'S CLUB DEL PERU (remember you have until January 15, 2011 to catch up with their payments, help YOUR CLUB AND NO HARM TO THAT IF PARTICIPATED AND PAID):

VILCA DAVID JUAN CARLOS PAREDES



MALAGA YORSI

What Kind Of Paint To Us To Paint A Metal Bed

LATORRE

GUERRERO, copied from Chilean Families of William de la Cuadra I. Gormaz

- Guerrero, Don Marcelino Rodriguez of Aljofrín, Toledo, the son of José Rodriguez de Mesa and Maria Guerrero Delgado.
tested in La Serena (Cisternas, 1733).
from their sons and Dona Rosa Ureta Career (vol. 576)
A. - Dona Maria Mercedes is the founder of Cotapos;
B. - Dona Micaela is named in the Aldunate and ancestress of the Errazuriz;
C. - Don José Guerrero He married Mary Gayon and Ureta Celis Carrera , whom he had to: a.-Rosa Guerrero
Gayon de Celis, with succession Varela, Solar beam, Carvallo et al. mother:
aa .- Antonio
bb.-Job
cc .- Francisco
dd.-Paula Magdalena

ee .- ff.-Miguel-Miguel
Gg.
hh .- ii .- Juan Ignacio

jj Antonia
kk .- .- Jerome D.
- Ramón Guerrero, who remains in II
E. - Juan Antonio Guerrero and Gayon de Celis, married Dona Francisca Varas Noriega, with a succession contained in the book.
F. - Antonia Guerrero, united (1801) to
Somarriva Isidora
ll .- b. - Josefa, named in Aguirre

II .- Ramón Guerrero Celis Carrera Gayon, took his wife to Dona María Mercedes Prado de la Sotta (De la Fuente, 1836) From here:
a. - Ramon Guerrero, the husband of Dona Rafaela Vergara Echeverz
b. - c.
Encarnacion Guerrero - Guerrero Transit, which remains in III d.-Pedro-José Manuel
e. , husband of Mrs. Jesus Prado
f. Montt - Rafael Narciso, married 1843 with Mrs. Nicole Guzman Ossandón

-felipe g. h. i.-John Climax
-

Diego Guerrero Guerrero III .- Prado.Ésta transit Transit I guess the married Manuel Puelma, as stated in its name as it appears in the archive Edwards, which states: Transito Puelma.No Manuel Guerrero married I found another Transit Guerrero.

Would You Stay Off Work With Tonsillitis

GUERRERO

I. - Juan Jose de la Torre, (do not know if the one shown baptized in the Tabernacle in 1748) married to Mrs. Mary (Mariana) Astudillo, who died on June 3, 1808 (whose death leaves the name of his wife, Mariana Astudillo)
parents:
A., Joaquín José de los Dolores de la Torre Astudillo, b. March 11, 1783 in San Isidro, Santiago.
B. Dona Rosa de la Torre, married to Jose Dolores Elgueta, as seen in his name,

Play Pokemon On Macbook App

curious detail TARZAN OF THE BODIES OF THE MODELS Anodized SALMON AND RIUFORT

Hi buddies,

We find a mystery in these two types of reel, in all ages who have changed their body has become standard in all models.

these two models in mind that Salmon was born in 1962 and in 1965 Riufort we are in the short-time whistle.

body type of the smaller models of this period are recorded in the body SAGARRA AND MADE IN SPAIN fine print and double arc.

spent the next epoch, that of the long leg or Tarzan, in large models leg ends at the center of the body are so long leg, and the smaller models have SAGARRA arch and right in the center of the body MADE IN SPAIN.

body type in the 60-70 years age short whistle

Type body in the smaller models in the era of leg length or Tarzan years 70-80

Here are two times two types of bodies, but Salmon and Riufort models not change the body, put another way the body and Riufort Salmon remained the same two periods did not change until the age of 80's large print.

vary in the cups, handles etc. But not in the body

we looked at them from behind the two types of body

The explanation for this is easy, the bodies of the Salmon and Riufort models have only one point in the neck, which is the collection system have Asa

Here is a single point

This photo shows the two ends of a crescent, of 46/2-47-51 models.

The curiosity is that in the bodies of the 70 time of Tarzan all bodies have two points and not a model for Salmon and Riufort.

For details such as the singing bowl straight round or we can get the idea if the 60 or 70, and if we look inside we can see that the 60 do not have the media for special coils and 70's if you have

This photo shows the body model of the 60 without the brackets.

In this picture the body of the 70's with the media for special coils.

I have studied this case very carefully because it was very rare that new body had no time to change but have not seen any body of these models with the body of the age of 70.

Obsessed to find a body like this photo but with a tip, a body almost impossible to find because there is silo that made the mold with a single point and would be in quantity is another.

Although this evil that I have not seen any real body that mind if you've seen, our fellow Rubinho Bilbao Alonso has sent me some photos of a Salmon with the body we're talking about, so would have to deny what I'm saying, but at the same time I do not have the strength to give as good or better if made and had the mondes of this body, if so be a model highly sought after.

ahead Viewed

In this picture you can see a single point and the letters of the 70.

this reel I do not think our friend is wrong or anything, but being the only one and I can assure you that we have reviewed with our partners reels and many collectors have found none like our fellow Rubinho Alonso.

is true that having the same body changes were found over the two periods, the first Salmon had the handle of the cup in cornet and straight edge, but I do not go into details so special in this small study, soon publishes the Family Tree and technical characteristics of the Psalm and Riufort model, and there we see all the changes that were taking these models over the two periods.

This study is really more focused to decipher this enigma, we all must take and watch your reel and if anyone has a spool Riufort both Salmon and the body of the 70 with a single point, send me a photo or get in touch with me to finish this study.

Thank you all for following this blog, thanks for your help because without your help could not perform these studies and especially thank you for sharing this passion of collecting reels.

A lau greeting to all

Sobrerelieve Translation

family tree of S IN THE FOOT OF COLOR AND TECHNICAL SPECIFICATIONS FOR MODELS MODEL

Hello mate,

In this study we travel to the depths at the time of the Factory Sagarra we are moving in the years 1946 to 1953.

Years hard but with great enthusiasm, was being dug a project a reality, making fishing reels and with great success.

In this study I highlight all the differences and characteristics who were the first models of reels Sagarra, and I have done a better way for me to understand and differentiate with explanatory photos.

And most important, as collectors always give value to the oldest pieces in good condition or that there are few built, this model reel have over all these virtues we must add the most important to me, is a completely handmade reel and that makes it have a value as important collector's item.

take this opportunity to thank S. Manel last owner of the house Sagarra for all the clarifications and explanations of our reels.

In this photo we see the S. Manel as he explains the failure of porcelain teeth and where they broke.

S FOOT IN COLOR Anodized

Anodized BLUE (recoilless)

Mod.46/2--Mod.47--Mod.51

Burgundy Anodized (recoilless)

Mod.46/2--Mod.47--Mod.51

The anodized color version are 10 different models.

bow neck Body: 46 / 2 and 47 in Bordeaux, and Blue, are 4 Mod

Body with neck half moon: 46 / 2, 47 and 51 in Bordeaux, and Blue are 6 Mod

The model 51 with neck bow I have not been confirmed to not see or know any, I think in 1951 and changed the neck mold half moon.

Bordeaux is less but Mr. Manel me that were as much as the two colors can not remember if 51 is also neck bow.

PATA DESCRIPTION OF S IN COLOR (Mod. 46/2-47-51)

All these descriptions can see below the in pictures.

YEAR: 1946-53

BODY : Pata S anodized in color Blue and Bordeaux, there are two types of bodies, the first model has two blades neck like a bow, we say that the typical top pair collection needle crescent him to cut the curve being in two parts ( for a better look there are photos in this study) in this body is the Mod.46/2-47 in both colors.

The second body, the cap for the collection is in two crescent tip, this is more recognized for what 46/2-47-51 all have equal to the closing of the factory, in this model Mod 46/2-47-51 body there in both colors.

casting system Cuquillo hand gravity and duralumin metal.

The song of the body straight.

The whistle with a bronze or brass cap ..

Paw born in straight and wide ends of the leg screw cap. The support legs are shorter cane and ending in a square-leg in the S anodized bodies are longer and finished in the round.

POINT: SAGARRA small point arc and leg down PAT. 182595 and 12723.

TOP: something thicker than the S-footed and without cap anodized bronze in the part of the handle, without grease or brake, screws in brass or bronze the flat or second circle of the lid is wider, has the same width as the screw head.

CUP: in the model 46 is a flat platform counterweight lead in the color of the reel and the other two models 47 and 51 are identical to the version of S leg Anodized something thicker and color.

HANDLE AND KNOB : perforated in the same color of the reel, black plastic knob finished in smooth taper, side looked almost seem completely round, other conical knobs have a sharp rim at the end of the handle and makes it look a trumpet.

COIL: of the mod. 46 / 2 two-piece metal silumin without deep and conical points are in black plastic.

Mod.51 in black plastic and metal silumin, uneducated and deep flat.

metal silumin Mod 47 without deep and conical points are in black plastic.

The cicadas of the three wedge-shaped models in metal.

PLUG: plug come in several models, round perforated small round ball, and the color Pintador reel silumin, the most common is to Perforated photo.

INTERIOR MECHANISM : Pata S the shaft are colored by the sunken bottom is where the bronze whistle cap The crown is conical and straight duralumin the back is completely flat by not anti, were found several pieces as eccentric or copper-pinion but the operating mechanism is the same.

This would be the technical description of the reels of color, but if we enclose a good photo like this of the body, it is another thing, can the font even numbers of patented, screws bronze and of course the whistle cap.

Pay attention to the fineness of the reel and perfection is more just that the next leg S, the only explanation is the type of mold, in this era of late 40's and early 50 molds are made of cast iron and hand.

The body is composed of four molds together, the body is round two, each half of the body is a mold, the neck is another and the leg is another mold together the four make the body .

The casting system of these molds is technically called Cuquillo gravity casting, Put another way, these molds are filled by hand with a pot and the liquid metal, the Cuquillo is like saying a saucepan funnel, was filled with liquid metal and gravity come into the monde, little by little weight, as you can see the number of reels was making very slow and labored for it and for him and for the preparation of the piece by filing and polishing by hand the call made by hand and foot models in S aninizados molds are made by machine to achieve solid finest finishes and perfect to whether their polished, and the system is already casting injection.

The neck bow tie in burgundy 46 model is the first body that was made, the crescent of two points in 47 of the second body blue, these are the two body types found in the S leg color.

After melt or get a piece of mold cleanup work began filing and polishing all burrs left mold, once it was perfect and the color anodizing bath

In these two pictures you can see where comes the leg of each version, color the thicker and nearly ended in the screw and anodized plastically starts at the screw and finer.

The flat or second circle of the lid, you can see in color is ax anodized screw and half of the screw.

Mod Platform 46 of the same color as the spool, winding two-piece aluminum base Silumin 13%, this means that aluminum is a more manageable pieces when making finer and complicated, but it is more white duralumin body and black plastic coil.

This model has the coil 47 of silumin Anodized blue.

Mod 51 with the coil in black plastic.

levers in shape are easier to mold, with all that in the future and not punch him because of the system for the poma thread in new look closed and the thread is machined.

The knob looked like this in the photo looks almost straight but tapered, the end is what we find rare and that we are accustomed to seeing more have highlighted a very round butt in the end making them seem like a trumpet.

In this picture we can see the knob on trumpet.

The most common cap seen in these models of reel is this photo, perforated plastic.

In this picture we can see the edge of the bowl thicker, plastic coil the plug hole.

ended with more to my point of view attractive color patterns 46 in the WHEEL OF PORCELAIN in capital letters, you need to see the headaches that brings get one, the history of the wheel I think I know her on the weaving machines.

The two models centers have the same needle 47-51 lifetime.

Well I hope you like companions, in future issues I hope to finish soon, will the family trees of all ages and body types.

in the manga I have a project to make a separate tab for each reel, some are already made.

Little by little we know all the differences and intricacies of all models, to the point when we see a reel know if original or not, if you have any incorrect parts or changed by the model.

Watch what you buy and what price to buy some normal sense, do not let it go obsesionéis and there for everyone, sure am out another good price.

A greeting to all lau